Works Bell Steering Wheel Standard Boss Kit - Suzuki ##986111044

*The compatibility is for JDM models only.

Compatibility:
Suzuki Alto HA12S F6A (10/1998-11/1999)
Suzuki Alto HA12V F6A (10/1998-11/1999)
Suzuki Alto HA22S K6A (10/1998-11/1999)
Suzuki Alto HA23S K6A (12/2000-03/2002)
Suzuki Alto HA23V K6A (12/2000-03/2002)
Suzuki Alto Works HA12S F6A (10/1998-09/1999)
Suzuki Alto Works HA12S F6A (10/1999-05/2000)
Suzuki Alto Works HA22S K6A (10/1998-09/1999)
Suzuki Alto Works HA22S K6A (10/1999-05/2000)
Suzuki Cappuccino EA21R K6A (05/1995-10/1998)
Suzuki Cultus GA11S G13B (05/1998-08/2002)
Suzuki Cultus GB31S G16A (05/1998-08/2002)
Suzuki Cultus GC21S G15A (05/1998-08/2002)
Suzuki Cultus GD31S G16A (05/1998-08/2002)
Suzuki Jimny JA22W K6A (11/1995-09/1998)
Suzuki Jimny JB23W K6A (10/1998-07/2018)
Suzuki Kei HN22S K6A (04/2001-10/2009)
Suzuki Swift HT51S M13A (01/2000-04/2005)
Suzuki Swift HT51S M13A (10/2004-06/2006)
Suzuki Swift Sport HT81S M15A (02/2000-03/2005)
Suzuki Wagon R CT21S F6A (04/1997-09/1998)
Suzuki Wagon R CT51S K6A (04/1997-09/1998)
Suzuki Wagon R CV21S F6A (04/1997-09/1998)
Suzuki Wagon R CV51S K6A (04/1997-09/1998)
Suzuki Wagon R MB61S K10A (01/1997-05/1999)
Suzuki Wagon R MC11S F6A (10/1998-09/1999)
Suzuki Wagon R MC11S F6A (10/1999-11/2000)
Suzuki Wagon R MC12S F6A (12/2000-10/2001)
Suzuki Wagon R MC12S F6A (11/2001-08/2002)
Suzuki Wagon R MC12S F6A (09/2002-08/2003)
Suzuki Wagon R MC21S K6A (10/1998-09/1999)
Suzuki Wagon R MC21S K6A (10/1999-11/2000)
Suzuki Wagon R MC22S K6A (12/2000-10/2001)
Suzuki Wagon R MC22S K6A (11/2001-08/2002)
Suzuki Wagon R MC22S K6A (09/2002-08/2003)
Suzuki Wagon R Plus MA63S K10A (05/1999-08/2007)
Suzuki Wagon R Wide MA61S K10A (01/1997-05/1999)

Brand:
Works Bell

Manufacturer Part#:
411

Stock#:
986111044

Remark:
- Other than Wagon R, Swift and Swift Sports the item is compatible only with the electronic SRS applications
- HA12S HA12V HA22S HA23S HA23V: For vehicles from 10/98 to 09/04.

These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.

*This item is non-stocked. Please make sure the leadtime before purchase.